Direct replacement for stock chassis.

No additional components or modification to stock parts needed.

Maintains stock body mount locations.

Chassis construction: Twin Horizontal Plate. 1/8" (3.5mm) lower pan,

3/32" (2.5mm) upper pan in natural G-10 fiberglass.

Dramatically lowers your truck's center of gravity without loosing

suspension or ground clearance under axels.  Could rollovers

be a thing or the past? We think so.

Relocated servo: Chassis fully protects servo and linkage

with easy access for service if needed.

Can be used with 6,7 or 8 cell NiCd or NiMh flat packs, or 2 cell

hard case Lipos. (3S could possibly be used by adding spacers)

Battery position is adjustable for weight bias front or rear.

(an 8 cell pack would have no weight bias adjustment)

Access to stock ESC power switch without having to removing body.

  Battery configuration for 6 cell or 2S Lipo rear weight bias.

   Battery configuration for 6 cell /2S Lipo forward weight bias.

   (top chassis plate not shown)

Flat bottom chassis glides over obstacles with out hanging up on braces or "kicking" rear up.

Curb weight is less than 1 ounce over stock setup and all of it is below the stock chassis floor height.

Mounting holes included for stock Traxxas XL5 , VXL-3c , Novak Super Duty or HV brushless ESCs

Others can be mounted with servo tape or Velcro.

Optional Outlaw decal sheet (not in kit & limited availability)