Clodbuster CVD Axle kit

One pair of Thunder Tech CVD's for the Clodbuster

made exclusively for Thunder Tech Racing by MIP

part # MIP-CB01  Retail price $60.00 per pair.


(inner hex not included)


  • Stronger than stock axles (8mm outer axle)

  • Sharper turning potential

  • 1/4" wider per side than stock

  • More efficient transfer of power

MIP-CB01 Kit Includes:

  • 1 complete pair of CVD axles

  • 2 outer drive hexes (molded plastic)

  • Four 8x12mm ball bearings

  • 2  wheel bolts (16mm x 5mm)

  • 2 drive pins

  • 2 rubber o-rings (for drive pin retention)

  • Two 5mm E-clip rings

  • Two 6mm shim washers

  • 1 center gear pin (3.5 x 20mm)

  • installation instructions


(Included parts are x2)                      Click Here for more pics


Optional aluminum outer hex drives (currently out of stock)

for CVD's & straight axels in 12mm, 14mm & 17mm hex sizes.

12mm hex drives: MIP-CB12    $25.00/set of 4 (out)

14mm hex drives: MIP-CB14    $25.00/set of 4 (out)

17mm hex drives: MIP-CB17  $25.00/set of 4 (out)

12mm drives  for  CVD's & Straight axles

14mm drives  for  CVD's & Straight axles

17mm drives  for  CVD's & Straight axles


Optional wheel bolts will be available for use with Thunder Tech wheel wideners and adapters

DEL-CB01 and DEL-CB04 will use 25mm x 5mm bolts. Part number: SP-5MF-25 $4.00 (set of 4)

DEL-CB-02 and DEL-CB03 will use 30mm x 5mm bolts. Part number: SP-5MF-30 $4.00 (set of 4)

TXT-1 wheel disc will use 20mm x 5mm bolts. Part number: SP-5MF-20 $4.00 (set of 4)


Check out Straight axle

Check out Ball Dif